+44(0)1462 459052

sales@roemheld.co.uk

News 2011

Roemheld introduces flexible clamping from zero
Roemheld introduces flexible clamping from zero
November 2011 - Roemheld has developed a new zero point flexible position clamping element that offers clamping and support – all in a single element. This new addition to the Roemheld workholding range offers the ideal solution for situations where mounting has to be adapted to suit the workpiece.
Read more
Roemheld moves 5-axis clamping up a gear at Autosport
Roemheld moves 5-axis clamping up a gear at Autosport
November 2011 - Roemheld will be launching the very latest additions to its 5-Axis vices and zero point mounting ranges at Autosport 2012. Visitors to the Roemheld stand E 1125 will see a wide selection of newly launched workholding solutions, including the flagship Hilma KC100 5-Axis vice. This combines all the features of the SCS vice range with the added advantage of round carbine inserts, which enable concentric components to be gripped in the same vice.
Read more
Roemheld launches magnetic clamping for die casting up to 230°C
Roemheld launches magnetic clamping for die casting up to 230°C
October 2011 - Roemheld has launched a new M-TECS magnetic clamping system specially designed for die casting machines, which is stable up to temperatures of 230°C. It is suitable for both horizontal and vertical machines and is available with or without the integral heating plate. Because the M-TECS 210 system is stable up to 230°C, it largely covers the whole temperature range that may occur in the die casting industry. Additional benefits include no downtime for heating up or cooling down in the press, a shorter stay in the hot area with less burning.
Read more
Roemheld’s eco range gets green light at EMO
Roemheld’s eco range gets green light at EMO
October 2011 - Roemheld’s new range of electric wedge clamps, swing clamps, zero point mounting systems, machine vices, block cylinders and work supports proved a huge draw for eco-conscious visitors at EMO 2011. On display were new electric clamping elements developed for use on hydraulic-free machines, machining centres and working places under clean room conditions and in the food industry.
Read more
Roemheld exhibits 5-axis initiatives at Aero Engineering 2011
Roemheld exhibits 5-axis initiatives at Aero Engineering 2011
September 2011 - Roemheld (UK) Limited will be exhibiting its comprehensive range of 5-Axis workholding solutions and zero point mounting systems on Stand 306 at Aero Engineering 2011. The Roemheld range of advanced Hilma 5-Axis vice systems can hold rigidly and safely on just 3mm while performing to tight tolerances and high repeatability. The Roemheld Stark Zero Point Mounting range revolutionises set-up times and keeps downtime to a minimum.
Read more
Roemheld rotor locking system secures wind turbine market
Roemheld rotor locking system secures wind turbine market
August 2011 - Roemheld offers a cost-effective modular rotor locking system designed to secure wind rotor turbines when maintenance and safety checks are being carried out. The innovative Hilma rotor locking system is available for both onshore and offshore wind turbines with a rating of up to 6 MW.
Read more
Roemheld group showcases latest innovations at EMO
Roemheld group showcases latest innovations at EMO
July 2011 - The companies of the ROEMHELD Group will be exhibiting together at EMO to showcase a number of workholding innovations. Alongside innovative and modular automation solutions for workpiece machining from just a batch of one upwards, they will be exhibiting numerous innovations including a product line of oil-free electric clamping tools and a series of energy-efficient hydraulic power units with intelligent control and energy-saving intermittent cycling. Römheld GmbH, Hilma-Römheld GmbH and Stark GmbH will be exhibiting together on Stand E42,hall 4.
Read more
Roemheld magnetic clamping hot attraction at Interplas
Roemheld magnetic clamping hot attraction at Interplas
July 2011 - The leading attraction to Roemheld Stand J4 at Interplas 2011 will be the M-TECS magnetic clamping system. The M-TECS magnetic clamping system is the only product on the market to work continuously at 240oC. It is very safe as it is based on a permanent magnet solution and requires no external power to remain clamped.
Read more
Roemheld launches electric swing clamp range
Roemheld launches electric swing clamp range
July 2011 - Roemheld has just launched a new range of electric swing clamps that work without hydraulics. Only a 24V direct current is required, making these clamps ideal for applications where the use of hydraulic elements is not possible, where the clamping elements need to be controlled separately or where the clamping force must be obtained after separation from the energy supply.
Read more
Roemheld to exhibit die clamping from a single source at BlechExpo 2011
Roemheld to exhibit die clamping from a single source at BlechExpo 2011
June 2011 - At this year's Blechexpo International Trade Fair in Stuttgart, Roemheld will exhibit comprehensive Hilma solutions for die clamping and changing in the field of metal stamping and forming technology on its stand in Hall 8, Booth 8302.
Read more
Roemheld solves problem of free form clamping
Roemheld solves problem of free form clamping
May 2011 - Roemheld has developed a new system that solves the challenges of clamping free form surfaces for industries such as Aerospace. The FSS system (Flexible Clamping and Supporting Systems) from Roemheld enables the clamping and supporting of various workpieces with different free form surfaces.
Read more
5-axis can be a trial
5-axis can be a trial
April 2011 - The benefits of 5-Axis machining can also be a challenge when choosing the right workholding system. All 5-Axis clamps and vices have to be secure and accurate, yet flexible enough to align with the positioning of the component on the table and allow for standard tool lengths.
Read more
Free cutting tool vouchers worth up to £500
Free cutting tool vouchers worth up to £500
April 2011 - Roemheld is offering customers who purchase products from its 5-Axis vices or Zero Point Mounting ranges, cutting tool vouchers worth up to the value of £500. Roemheld has joined forces with major cutting tool brands, including Iscar and Seco, to offer this workholding promotion.
Read more
5-axis vices take pole position at Autosport
5-axis vices take pole position at Autosport
January 2011 - The Roemheld range of advanced 5-Axis vices, which enable safe gripping on just 3mm, proved the star attraction at the company’s workholding stand at Autosport.
Read more
Roemheld launches new self-centring vice
Roemheld launches new self-centring vice
January 2011 - Roemheld has introduced a new self-centring vice to provide quick, simple fixturing for concentric machining of different sized workpieces. This new Bock vice from Roemheld is compact and features an adjustable Gib design for increased accuracy. It is available with a Universal base that is easy to mount directly to machine tables.
Read more