• For further technical and dimensional information please download the relevant pdf below.

FEATURES

• designed with economy in mind without compromising quality
• steel slide and base, guideways hardened and ground
• compact design
• high precision
• quick adjustment with socket pin
• comprehensive accessories

CATALOGUE / DATA SHEET

type	part no.	PDF data sheet
EL 100	9.3022.1113
EL 125	9.3023.1113
EL 160	9.3024.1113	220 kb
EL 160 long	9.3024.1313

FEATURES

• maximum precision at full clamping force
• power transmission and the spindle drive are integrated into the slide body and are fully encapsulated
• achievable clamping ranges 0-436 mm in connection with reversible step jaws (jaw width 160 mm)
• lock for purely mechanical clamping, e.g. of delicate workpieces
• comprehensive accessories including clamping force selection, angular drive etc.

CATALOGUE / DATA SHEET

type	part no.	PDF data sheet
standard
KNC 100	9.3152.0111
KNC 125	9.3153.0111
KNC 160	9.3154.0111
universal		382 kb
KNC 100	9.3152.0211
KNC 125	9.3153.0211
KNC 160	9.3154.0211

FEATURES

• keyways in longitudinal direction and across the length for quick and precise positioning
• keyways and threaded holes on slide and fixed jaw for an extension of the clamping range with step jaws inserts
• rapid and safe fastening using clamping claws
• extensive accessories

additional features – hydraulic:

• extremely short clamping and unclamping cycles using hydraulic version
• manually adjustable gap using lead screw for workpiece placement
• hydraulic stroke between 5 and 7mm
• semi-or fully automatic operation using hydraulics
• extremely short clamping and unclamping cycles
• clamping force can be monitored and interlocked with machine safety system

CATALOGUE / DATA SHEET

type	part no.	PDF data sheet
mechanical
NC 100	9.3072.0203
NC 125	9.3073.0203
NC 160	9.3074.0203
hydraulic		198 kb
NC 100 H	9.3082.0203
NC 125 H	9.3083.0203
NC 160 H	9.3084.0203

FEATURES

• mechanical zero point clamping system allows the set-up of different clamping devices in a few seconds
• rapid, precise change of clamping elements
• simple and robust design
• no external power supply required

CATALOGUE / DATA SHEET

type	part no.	PDF data sheet
Quintus 60	9.6153.0101
Quintus 100	9.6155.0101	742 kb
more types on request

FEATURES

• jaw widths 80, 120 mm
• optimised features for unopposed multiple side machining
• high degree of freedom for spindle and tools; low risk of collision
• suitable for use with short standard tools
• repeatable and controllable clamping forces of up to 25 kN (SCS 80) and 40 kN (SCS 120)
• jaw with a special grip for maximum holding force (factor 3 as compared with standard jaw)
• large range of accessories
• designed with economy in mind without comprising quality

CATALOGUE / DATA SHEET

type	part no.	PDF data sheet
SCS 80	9.3672.0101
SCS 120	9.3673.0101	428 kb

FEATURES

Duo:

• mechanically operated
• compact design
• rapid, customer-friendly double clamping
• one-sided working of the spindle
• simple adaptation of clamping jaws
• precisely adjustable clamping forces
• compact design

CS & DCS:

• mechanically operated with power amplifier or hydraulically operated
• compact design
• rapid and easy clamping/unclamping by a short lever movement
• automatic clamping/unclamping with hydraulic version
• simple adaptation of standard and special jaws
• rapid jaw change
• staggered jaw widths between 25-80 mm
• precisely adjustable and exactly reproducible clamping forces
• ideally suited for use with zero point clamping systems
• can be installed in any position

additional features – DCS:

• clamping points work independently from each other

CATALOGUE / DATA SHEET

type	part no.	PDF data sheet
DUO 80/200	9.3654.0601
DUO 80/240	9.3654.0701
mechanical
CS 80 M/200	9.3614.0202
CS 80 M/280	9.3614.0302
CS80 M/360	9.3614.0402
hydraulic
CS 80 H/200	9.3624.0202
CS 80 H/280	9.3624.0302	834 kb
CS 80 H/360	9.3624.0402
mechanical
DCS 80 M/280	9.3634.0102
DCS 80 M/360	9.3634.0202
hydraulic
DCS 80 H/280	9.3644.0102
DCS 80 H/360	9.3644.0202

FEATURES

• double clamping system for single and row clamping
• used for clamping workpieces of equal or different size
• mechanical and hydraulic operated versions
• suitable for holding two different workpieces that can be machined in one operation
• positioning and fastening in keyways across the length or in grid holes respectively
• individual adjustment of the both clamping points
• clamping force compensation allowing constant zero point of the central jaw
• central jaw may be installed in the end position to increase clamping range for larger components

CATALOGUE / DATA SHEET

type	part no.	PDF data sheet
mechanical-hydraulic
DF 100 M	9.3422.7003
DF 125 M	9.3423.7003
DF 125 M long	9.3423.7003
DF 160 M	9.3424.7003
hydraulic-hydraulic		882 kb
DF 100 H	9.3422.7003
DF 125 H	9.3423.7003
DF 125 H long	9.3423.7003
DF 160 H	9.3424.7003

FEATURES

• double clamping system for single and row clamping
• used for clamping workpieces of equal or different size
• mechanical and hydraulic operated versions
• easy adjustment of the clamping range using 3rd hand function
• safe loading and unloading using the 3rd hand function
• floating central jaw for DS 125, accommodating up to 4 workpieces
• well protected spindle area, no uncovered apertures

CATALOGUE / DATA SHEET

type	part no.	PDF data sheet
mechanical
DS 100 420mm	9.3665.0101
DS 125 430mm	9.3666.0101
DS 125 510mm	9.3666.0201
hydraulic		519 kb
DS 100 420mm	9.3685.0101
DS 125 430mm	9.3686.0101
DS 125 510mm	9.3686.0201

FEATURES

• mechanical-hydraulic and hydraulically operated
• customer-specific design of the clamping element to suit working areas, travelling distances, clamping surfaces and machining tasks
• easy selection from a range of standard designs
• base is available in at least 2 alternative lengths for each size
• using appropriate parameters, the system can be used for horizontal and vertical applications
• adaptation to special clamping tasks using special or standard jaws

CATALOGUE / DATA SHEET

type	part no.	PDF data sheet
VL 100	9.3172.7003
VL 125	9.3173.7003	679 kb
VL 160	9.3174.7003

FEATURES

• mechanical-hydraulic operated
• suitable for at least 4 equal or different workpieces
• ideal for small batch production on horizontal machining centres
• multiple clamping ensures extended pallet cycles, one operator can serve several machines
• reduction of non-productive times, increase of productive times
• three-side machining of all workpieces in one clamping application
• extremely robust design
• highest precision machine vice

CATALOGUE / DATA SHEET

type	part no.	PDF data sheet
T 100	9.3322.0403
T 125	9.3323.0403	404 kb

FEATURES

• mechanical-hydraulic operated
• suitable for up to 16 equal or different workpieces
• when using floating central jaws, up to 16 workpieces can be loaded
• safe manual clamping without need for a hydro unit
• up to 40 kN per clamping point on the TS 125
• precisely adjustable clamping forces
• the spindle area is fully protected and the slide guideways are free from play
• rapid changeover increases productive time
• multiple clamping ensures extended pallet cycles
• high workpiece density avoids unessential traverse paths from workpiece to workpiece

CATALOGUE / DATA SHEET

type	part no.	PDF data sheet
TS 100	933650201
TS 125	933660201	823 kb
TS 125 L	933660301

FEATURES

• multiple tri-fold clamping system ‘premium, easy clamp & goliath’
• precise frictional connection between base and clamping modules achieved by fine teeth and a patented eccentric locking system using only one fixing screw
• rapid set-up without measuring instruments using the scale on the base module and graduation marks on the fixed and clamping module
• fixed and clamping module available in various widths
• clamping modules with a rear contact surface accurate in size
• workpieces need not be accommodated in "mirror image"
• accommodation of a maximum number of workpieces
• extension to the base modules is possible
• exact and repeatable workpiece positioning
• zero point adjustment using the machine spindle is not necessary

premium:

• all faces ground
• tolerance +/-0,01 mm
• all system parts hardened and rust-resistant
• clamping modules with retaining guide
• scale on both sides

easy clamp:

• all surfaces fine milled and surface hardened
• tolerance +/- 0,03 mm
• scale one-sided
• eccentric spindle with hexagon socket

goliath:

• clamping forces up to 40 kN per unit
• additional power retaining with link blocks
• used for heavy-duty machining

CATALOGUE / DATA SHEET

type	part no.	PDF data sheet
premium
MSH 24	see data sheet
MSH 40	see data sheet
MSH 60	see data sheet
MSH 100	see data sheet
easy clamp
MSH 40	see data sheet	586 kb
MSH 60	see data sheet
MSH 100	see data sheet
goliath
MSH 60	see data sheet
MSH 100	see data sheet
MSH 120	see data sheet

FEATURES

• hydraulically operated self-centering machine vice
• centric clamping of cubic and cylindrical workpieces
• high clamping repeatability +/-0,01 mm
• large clamping ranges
• any mounting position
• customer specific jaws
• protection against coolant and swarf by integral wipers built in to
• clamping slides
• available with opening stroke limitation using proximity switch or set-screw
• guide ways can be lubricated using lubrication system

CATALOGUE / DATA SHEET

type	part no.	PDF data sheet
Z 80 H	on request
Z 100 H	935420101
Z 125 H	935430101	327 kb
Z 160 H	935440101

FEATURES

• pre-machined workpieces can be clamped using standard jaws
• interchangeable jaws with different functions extend the range of applications
• different jaws allow efficient positioning and clamping of simple and complicated workpieces
• costly fixtures dedicated to single workpieces can be avoided

standard jaws include:

• step jaw insert
• precision step jaw
• pendulum jaw
• vee jaw
• clamping jaw, soft
• clamping jaw, extra high
• clamping jaw, extra large

CATALOGUE / DATA SHEET

FEATURES

• floating jaws for multiple clamping maximises the machining working area
• floating jaws reduce tool change and cutter travel which contributes to a significant reduction in the cost of manufacture
• lower grip prevents workpieces from rearing up
• results in longer machine up time
• all workpieces are clamped with the same clamping force
• floating jaws allow optimum utilization of the working area by dense workpiece arrangement

CATALOGUE / DATA SHEET

FEATURES

• quick insert system with down thrust effect
• base jaws are fastened to the slide and to the fixed jaw using screws
• jaw inserts may be inserted and removed swiftly
• jaws insets are kept in place by two permanent magnets
• down-thrust effect ensures constant reference points leading to high quality of the workpiece
• soft inserts for customer's own adaptation to specific workpieces extend the range of applications
• reduction of non-productive time
• suitable for use with all Hilma clamping systems (jaw widths 100-160 mm)

CATALOGUE / DATA SHEET

FEATURES

• The SlimFlex jaw system allows 3-side machining of centrally clamped workpieces with dimensions less than the jaw width of the clamping device
• Retaining pieces keep the workpiece off the base jaw, which provides optimum access from three sides for the work spindle
• even small workpieces can be centrally clamped for 3-side machining
• rapid, infinitely variable positioning with the help of the scale, quick and simple clamping
• elastic pressure pads prevent dirt accumulation between the retaining pieces and the base jaws
• the number of time-consuming clamping operations can be considerably reduced, the system will repay for itself in a very short time

CATALOGUE / DATA SHEET